Search found 31 matches
- 27th January 2019 - 12:14pm
- Forum: Cars and Parts Wanted
- Topic: Wtd, Fuel Tank Sender
- Replies: 2
- Views: 321
Hi there got sender from 72 square, now gone in exchange for type 25' also got roll of window rubbers for all windows except windscreen, give me a call on 07716029349 cheers Mawsy
Hi all, I have a72 square almost ready for the road. Problem is on the carb manifolds there are balance pipes, 2 on the driving side carb, 1 on the left hand carb of a smaller diameter. The carbs are solex pict 3, 32/34. How are these connected. I have a drawing of the balance pipe crossing the engi...
Final solution to dizzy problem was to go back to vaccum advance dizzy as the electronic in my experience was pants, running better now but left hand carb not accellerating, will take off and investigate cheers Mawsy
Hi there, I have a72 square that is just about ready for the road, I cannot find how to install the carb vaccum pipes. The left hand carb has 1 pipe below the carb, the right has 2 pipes below the carb. I have fitted a vaccum advance dizzy as the acuspark dizzy was no use. Also the left carb is not ...
Hi again noticed dizzy rotor turning intermittently, removed dizzy machined 2 mm to allow deeper drop, running a bit ough will fit strobe and sort it hopefully cheers all Mawsy
Hi all having a nightmare setting up timing on my 72 square, was running then started missing and popping changed dizzy to electronic acuspark , with new coil, no better , process of elimination found starter bush had failed, replaced and had starter reconditioned, at last problem sorted. Set up tim...
Hi there,I have had a rewrite on my type 3 square, everything works lights indicators wipers, cranks and turns. The problem is when the startermotor turns I lose voltage to the coil, any help please cheers Mawsy
I have just had a re wire on my type 3 square, everything works, lights , indicators etc. The problem is when I crank the starter motor the voltage to the coil drops to zero all the members of our club do not have an answer. Help please to maintain my sanity cheers Mawsy
Hi there, I am currently trying to source window rubbers for type 3 all models these will be available with or without groove for trim insert. The out come of this will be dependant on the cost of setting up the manufacturing, and demand by club members. I will post more info when production is cost...
Thanks for that will give it a try, sadly already used fairy liquid will flush out ,will post photos of car and restoration when my son has time, bit of a dinosaur with technology more used to hammers and stuff that's what 70 years on planet gives you. Car is 1972 rhd square total rot box when start...
Hi there am looking for a tool to lnstall the aluminium trim in my window rubbers on my type 3 square right hand drive square , any advice welcome. Found out after removing them it was not necessary to remove them cheers mawsy