Hi I have the inner tunnel seat runner cuts in very nice condition from a 71 car. They have the sprung part you push down on to release seat.

I bought a correct Bosch Type 3 set from VWHeritage

I have good used windlace trim in black for around the doors, original bonnet badge, and also used trim for around the windscreen (this is always fragile and used is usually a bit twisted). Try and buy genuine whenever you can. Bits I have are all cheap or happy to trade for something I need. Or you...

Just getting the 69 ready to fire up but cannot remember where the MPS vac line goes to? or Where the auto trans modulator vac line runs to?

Anyone able to check their car or know ?

thanks

I have genuine used Type 3 4 stud for IRS car steel wheels available (correct offset for Type 3). and also 3x earlier Type 3 wide 5 NOS ones.

Please pm if you are interested

185 65 15 on rear for the tyre I am sure thats what I run on my Squares.

front I have to check

I found some NOS boxed genuine VW ATE calipers with the pads whilst on a recent trip to Germany in an old parts warehouse. These are for late Type 3 (and Type 4 so Iam told). Doesnt get any better than this, why spend money on remanufactured ones when you can have these and like new factory spec bra...

I have a rear fastback seat frame if you need something.

drop me a pm its cheap

Latest project is this 69 Squareback from Texas. Super solid, Non op been laid up for a couple of decades. Never welded and no rot. Needs full re-commisioning and fresh interior. Perfect patina too :) Peru green http://i710.photobucket.com/albums/ww108/vwsplitbus/vwsplitbus194/squareback69_zpsho9mh2...

Next time clean up and soak some ATF fluid on the seized part.

Try again next day Works nearly every time.

pic on the for sale thread and also on page 3 of my members ride thread shows the go hole in fender.

Nice vents looking good

I have some used rubber beam support mounts and also the metal brackets and hardware if you need some.

Nice work on the bump stop mount

I have a pair of used carbs that I can break for parts.

If you need anything just let me know

Cheers Peter thanks for the heads up :thumbsup: Got to take rear wings off again to wax oil and then seal the fender beading with some Anchor wax. I have the foam seal strip to fit as well. Managed to sort out the lower valence beading (velvet green) so when they turn up I will get on with sorting.

I have always thought of it as a 5 seater car too David.

If I can remember where I read the info that states 4 seater then I will post a pic up.

Contact Mario at T3HQ he has a nice stash of NOS and good used metal. Sure he will have what you need.

No problem Will,

drop me a private message and let me know exactly what you would like.

Sure my 71 squareback docs state 4 seater (also in handbook it says 4 seater).

I know you have done a load of work on these beams but I have a RHD beam if you need one.

will advertise soon but message me if u need it.

Just replacing the sun baked plastic fender beading on my square. It looks like there was maybe some kind of sealant used originally when installed. Not much but there is a residue. Anyone know for sure what VW used when installing originally? What do people use now to seal when replacing the beadin...

Nice looking Notch.

Get yourself the Bentley manual it will help you out loads.

If you need help with the interior just message me. eg headliner, carpets upholstery etc

Also dashboard pad has been reproduced by a guy in the USA.

Loads of really great info on thesamba.com too


Good luck!

Treat your T3 this winter. Headliner, upholstery, carpet, interior panels or some detailing. Rear load area Top quality carpets in German Square weave available. Please give me a call or pm to discuss. best regards Mike http://i710.photobucket.com/albums/ww108/vwsplitbus/vwsplitbus043/BUSEYESsignatu...

Mine has some damage to the wire, but it is part no. 1 237 330 191 managed to find some from CIP1 in USA. listed as auto up to 71.

Going to swap out fuel filter and replace and check the metal lines also as maybe they have a blockage.

Where can I get a new Bosch condenser for my 71 auto squareback part no. 1 237 330 191 None of the usual suspects have this one listed

Or does anyone have some in their stash and willing to sell me one please?

thanks Mike

Wow! Doug :) What a nice find. Its a great colour. Mine just has more rustina mixed in ;) I managed to find an NOS exhaust recently for very little. But missing the tailpipe. So they are out there. Getting the knackered old one off was the challenge. As Dave says the 42mm pipe style fixings are a PI...