After the chassis comes the body! I already have new heater channels and outer skins and front bumper mount panels form CSP and inner arch repair pannels from Konny. I thought these panels would suffice to repair the body. I started on the front wing first. This wing had a nice surprise from the pre...

It has been a long time since posting something here but I have been working on the car! I got some small welding lessons and it gave the project an extra boost! The pan edges are repaired! http://i101.photobucket.com/albums/m72/yukatan/Car/WP_20161019_004_zpswohuchyt.jpg http://i101.photobucket.com...

CSP:

http://www.csp-shop.com/cgi-bin/cshop2/ ... l%2CType-3

VW Heritage

https://www.vwheritage.com/shop/type3/t ... dy-repair/

I have a pair of CSP inner and outer sills at home, if you want I can take some pictures of them.

I had some welding lessons and tricks from a friend and got started on the pan edges: I replaced the front corner of the right hand side: http://i101.photobucket.com/albums/m72/yukatan/WP_20161019_003_zpsv8dz2p3o.jpg and also rear corner: http://i101.photobucket.com/albums/m72/yukatan/WP_20161019_00...

After cleaning the underside of the pans, I found some small holes in the battery tray. Some small hole became very rapidly larger holes and the panel was not repairable. I tried to weld in a large sheet metal plate but I am not happy with the result. Ordered a replacement battery tray at werk34. I ...

Thanks for the advice s.unsworth and brimfull. I'm going to try fabricate a new edge myself and weld it on!

I already orderd parts from typ3konny, they are very helpfull and fast!

Does T3D also have a lot of parts on stock?

Hi, I am Jasper, 25 years old, living in Belgium. Seven years ago I bought the Notchback with the idea to get it on the road with minimal work. Of course there was more work than expected and the to project got on a hold. 7 years later, a few degrees richer and some spare time I got him back out of ...

Hi everyone, I started with the restoration of a 1970 Notchback. The floor pans are in good condition and I cleaned them up. http://i101.photobucket.com/albums/m72/yukatan/WP_20160916_003_zpsicimwyca.jpg There were some small holes which I patched up nicely with a mig welder and I also removed the j...