Search found 19 matches
- 2nd April 2018 - 3:07pm
- Forum: The Workshop
- Topic: Carbs, rebuild or replace
- Replies: 5
- Views: 4444
Re: Carbs, rebuild or replace
Hi guys, I installed on EC 1,8l injection engine, 36-40 PDSIT carbs. Is there any "standard" adjustment for this cabrs ? For expamle, Solex 32 PICT3 standard adjustment for fuel ratio is 2,5 turns, tec... On 36-40 we have only 2 screws, one is for air mixture and second is for free-running mixture. ...
- 2nd August 2010 - 7:11pm
- Forum: Type 4 Corner
- Topic: Opening rear windows - 412 Variant
- Replies: 0
- Views: 2015
Opening rear windows - 412 Variant
Dear All,
I'm searching for a opening rear windows kit for 412 Variant. If someone from you have it installed, please add pictures and installation instruction here.
Will be appreciate for any suggestion, thanks.
I'm searching for a opening rear windows kit for 412 Variant. If someone from you have it installed, please add pictures and installation instruction here.
Will be appreciate for any suggestion, thanks.
- 2nd August 2010 - 7:03pm
- Forum: Type 4 Corner
- Topic: 72 411 Brake master cylinder re-build kit needed?
- Replies: 2
- Views: 2914
Re: 72 411 Brake master cylinder re-build kit needed?
For cca 50 EUR in Czech Republic
viewtopic.php?f=22&t=2900&start=0
viewtopic.php?f=22&t=2900&start=0
- 1st March 2010 - 7:16pm
- Forum: Type 4 Corner
- Topic: 412 Chock absorbers
- Replies: 27
- Views: 19950
- 8th June 2009 - 3:50pm
- Forum: Type 4 Corner
- Topic: Towing for 412 Variant
- Replies: 5
- Views: 5110
- 2nd June 2009 - 11:15am
- Forum: Type 4 Corner
- Topic: Towing for 412 Variant
- Replies: 5
- Views: 5110
- 2nd June 2009 - 8:13am
- Forum: Type 4 Corner
- Topic: 412 Chock absorbers
- Replies: 27
- Views: 19950
I still can't import pictures, will be good if someone can put this pictures here. However -> completely refurbish in Czech from my old one. Small company which are producing racing shock absorbers. Price was cca 90 EUR/piece. Result is fantastic ! Performance better than I expected. http://www.flat...
- 2nd June 2009 - 7:54am
- Forum: Type 4 Corner
- Topic: Towing for 412 Variant
- Replies: 5
- Views: 5110
Towing for 412 Variant
Hi All, I would like to install on my 412 Variant towing equipment and asking for advice. -> does anybody from you have experience with installing of towing on 412 ? -> if anybody from you have allready installed towing equipment, ,please send me pictures to my email milos.milojkovic@seznam.cz I hav...
- 21st February 2009 - 6:21pm
- Forum: Type 4 Corner
- Topic: Heating 412 Variant
- Replies: 2
- Views: 3066
- 20th February 2009 - 9:38am
- Forum: Type 4 Corner
- Topic: Heating 412 Variant
- Replies: 2
- Views: 3066
Heating 412 Variant
Guys I need a help -> in 412 are 2 heating systems. 1) is like at beatle: engine fan -> heaters -> into eberspracher -> cabin 2) But there is a additional independent fan located back, in the engine space, for pushing air, and I don't know how it is contoroled. When I connected directly to power 12V...
- 4th February 2009 - 8:54pm
- Forum: Services
- Topic: Clutch and Brake Cylinder Reconditioning
- Replies: 4
- Views: 9785
Refurbiched in Czech for cca 100 EUR in 10 working days. If anybody have a interrest -> PM
http://s589.photobucket.com/albums/ss33 ... G_5786.jpg
http://s589.photobucket.com/albums/ss33 ... G_5786.jpg
- 29th December 2008 - 12:12pm
- Forum: Type 4 Corner
- Topic: Sparks for AN engine
- Replies: 0
- Views: 1935
Sparks for AN engine
Hi to All, can somebody help me -> which NGK (no Bosch, Champions, etc.. only NGK) sparks I have byu and install to my AN (1.8l, 84HP, 2xsolex carbs) engine? Does anybody from you are using NGK ? I'm using them over 20 years and no issue. Just to be careful during ordering/shopping -> must be origin...
- 16th December 2008 - 4:38pm
- Forum: Type 4 Corner
- Topic: 412 Chock absorbers
- Replies: 27
- Views: 19950
I predicted will not be easy, therefore I allready contact some Chock absorbers refurlbish company. They told me, that they can refurbish any chock absorber, just to bring them old one. They will change valves, rubbers and oil, clean from rost out/in side and paint from outside whith colour which yo...
- 15th December 2008 - 1:16pm
- Forum: Type 4 Corner
- Topic: 412 Chock absorbers
- Replies: 27
- Views: 19950
- 11th December 2008 - 1:50pm
- Forum: Type 4 Corner
- Topic: oil leaks
- Replies: 11
- Views: 10764
I have good experience with
http://www.flat4.org/forum/images/cache ... 36.JPG.png
no leaking any more....
http://www.flat4.org/forum/images/cache ... 36.JPG.png
no leaking any more....
- 11th December 2008 - 1:46pm
- Forum: Type 4 Corner
- Topic: 412 Chock absorbers
- Replies: 27
- Views: 19950
412 Chock absorbers
Does anybody know, which kind of chock absorbers fit to 412 ?
Does anybody have experience with replacement ?
Can somebody give me some web links for it ?
Thanks for help !
Does anybody have experience with replacement ?
Can somebody give me some web links for it ?
Thanks for help !
- 1st July 2008 - 8:29pm
- Forum: Members' Cars and Project News
- Topic: My 411 from Serbia
- Replies: 7
- Views: 6436
- 4th May 2008 - 9:45pm
- Forum: Members' Cars and Project News
- Topic: My 411 from Serbia
- Replies: 7
- Views: 6436
Thanks for such a great feedback - I'm appreciate. Sorry for my english, I'll try to do my best. Originaly, in the car was engine 1.7 Injection. I don't know what ex owner done with this car, but part of engine was burned, specialy right side. I both the car in such a condition, w/o trying engine, g...
- 1st May 2008 - 9:22pm
- Forum: Members' Cars and Project News
- Topic: My 411 from Serbia
- Replies: 7
- Views: 6436
My 411 from Serbia
Hi guys, I'm comming from the Czech Republic and let me introduce my first 411, which I found in Belgrade, Serbia. As you can see, still a lot of work on it. Your sites will be very helpfull for me to finish the project. In next couple of days, I'll translate the topics about this car. http://www.fl...