Rusty corner at tail end of the rear, behind the bumper, cut out.









Rust cut out.



New panel made up and welded in.




Drivers side rear finally finished

Final piece of the wing corner made up and welded in,

Yet more rust removed from the inner corner, https://i.imgur.com/AcIyDYr.jpg https://i.imgur.com/HDYUIUY.jpg https://i.imgur.com/NeF45Tg.jpg https://i.imgur.com/TiDUsQq.jpg https://i.imgur.com/lvhS7xR.jpg https://i.imgur.com/MhCmchI.jpg New panel made to replace the support metal. New support panel ...

More rust damage in the usual places in a type 3.

]









New roof repair section hammer formed with roof gutter.

New body support mounting welded in and repaired.









Another view of the support bracket.


Bulkhead panel also welded in


Bulkhead now completed

New metal replacing rust in drivers side rear wheelarch. https://i.imgur.com/CvVshXh.jpg https://i.imgur.com/YYETeUZ.jpg https://i.imgur.com/GJx28eg.jpg https://i.imgur.com/B6cEcFt.jpg https://i.imgur.com/XoX416u.jpg New panels around air intake and tail. Inner edge panel at engine bay. Existing rus...

Wheel arch endpiece repair added, and airduct surround shroud,




]

Its in the same location as this.




And there are two more panels, to be fitted, before the wing cover panels.

The ope surround panel, and the top drain panel above this.

I am . Its approximately just below the engine mounting location.

I,ve referenced the location from the original, albeit rusty remains.

I,ll trya and take a better pic tomorrow

More rust to cut out. https://i.imgur.com/Mke2IsM.jpg https://i.imgur.com/DypjX74.jpg https://i.imgur.com/DxoyHzD.jpg https://i.imgur.com/hlJDnE2.jpg https://i.imgur.com/RoB1GRv.jpg https://i.imgur.com/c0v3VNr.jpg New panels made to replace the rusty ones. Rust removed, and cleaned up area. Lower wh...

New panel made for the right hand side of the engine bay, including the bulkhead piece, at the back.





[]

Extensive rust under driver rear wheel arch, just ahead of the engine bay. https://i.imgur.com/mjb4qww.jpg https://i.imgur.com/dzsGmNM.jpg https://i.imgur.com/l1LBjxN.jpg https://i.imgur.com/tjQZxKQ.jpg Bulkhead corner removed to see whats beneath. View through bulkhead into the back face of the eng...

Rust damage cut out from rear left hand side body support mount, https://i.imgur.com/K5Qd5OH.jpg https://i.imgur.com/Di5eXwp.jpg https://i.imgur.com/Cacqg2H.jpg https://i.imgur.com/uRQRQK2.jpg https://i.imgur.com/os4o9BL.jpg https://i.imgur.com/i8sGu1h.jpg https://i.imgur.com/OTOm3xA.jpg https://i.i...

Wheel house panel pleat completed, https://i.imgur.com/N2XTA0t.jpg https://i.imgur.com/GliSyvc.jpg l] https://i.imgur.com/tcsRcpS.jpg https://i.imgur.com/tcsRcpS.jpg https://i.imgur.com/ze8qK6U.jpg https://i.imgur.com/x6Pi9Ib.jpg https://i.imgur.com/clIYN62.jpg Front bulkhead corner rust damage. Rus...

Great project so far..

Rust cut out.



New panel fabbed up.

Front fuel tank, suspension support section. Panel fabricated from 2 sections,



To replace this,

Front clip repair panel trimmed for fitting to bottom of clip.





Now welded in and rough ground.

Aye....and get paid for the privelage.

Thats only because I am an out of work artistic joiner, and at 60 cant even get
an interview for a job................

So fasty is keeping me sane

Wheel tub repaired

It,ll be solid anyway

New side panels at spare wheel tub welded in.

Found more rust under the nose either side of the spare wheel tub. https://i.imgur.com/uJkpSHG.jpg [/url] Made these panels to replace the rusty ones. https://i.imgur.com/GTjkYkX.jpg Cut them out And welded in new metal. Spare wheel tub has seen better days. https://i.imgur.com/FTQvMAq.jpg So a new ...

Drivers side heater channel inner part , welded in today, and worked well. Pics to follow. next is to cut out the passenger heater channel, offer in the new one for marking, and final fabbing, then weld in too. Major hurdle over once this is done. Expect to have new channel in by this day week. Then...