Search found 382 matches
- 14th July 2011 - 8:50pm
- Forum: The Workshop
- Topic: Aftermarket Exhausts for a Fastback
- Replies: 6
- Views: 3605
Re: Aftermarket Exhausts for a Fastback
all will be quieter and crisper than a zoom tube. I remember putting a zoom tube on my first beetle (that I still have) and I loved it but long trips got a bit noisy... The EMPI exhaust is a budget system - it hangs out the back of the car, usually needing the rear valance to be "massaged" out a lit...
- 13th July 2011 - 10:20pm
- Forum: The Workshop
- Topic: Aftermarket Exhausts for a Fastback
- Replies: 6
- Views: 3605
Re: Aftermarket Exhausts for a Fastback
The EMPI exhaust is a budget system - it hangs out the back of the car, usually needing the rear valance to be "massaged" out a little - mine did not last well. The Thunderbird version above is much better quality but does not fit the type 3. The monza 4 tip is similarly low quality and sits really ...
- 13th July 2011 - 9:17pm
- Forum: Members' Cars and Project News
- Topic: 1970 Squareback Project
- Replies: 95
- Views: 59015
Re: 1970 Squareback Project
Bit of an update - finally. All welding done and bodywork prepped. Welded up trim holes, fuel filler flap and bumper tube holes and removed large front indicators to be replaced with front bullets. Car is now away being painted in Porsche Meissen Blue - a 356 color - mid grey / blue. Will upload pic...
- 12th April 2011 - 9:28pm
- Forum: Virtual Clubhouse
- Topic: When, what, who and how?
- Replies: 13
- Views: 7268
Re: When, what, who and how?
1200 beetle - bought for £400 in 1987 - still have it in my garage - without the newspaper and chicken wire sills
- 22nd October 2010 - 11:25pm
- Forum: The Workshop
- Topic: Now hating fudge! (a bit!)
- Replies: 47
- Views: 21060
Re: Now hating fudge! (a bit!)
excellent news - glad it got recycled into another car...
- 14th October 2010 - 11:11pm
- Forum: The Workshop
- Topic: Now hating fudge! (a bit!)
- Replies: 47
- Views: 21060
Re: Now hating fudge! (a bit!)
Not sure of compatibility but I have a entire type 3 fuel injection system for sale - loom, ecu, all components, tank, pump - everything - if the fuel pump or other components are the same - you can buy...
- 5th October 2010 - 8:38pm
- Forum: Virtual Clubhouse
- Topic: dellorto.co.uk vw carbs
- Replies: 2
- Views: 2233
Re: dellorto.co.uk vw carbs
they sell a LOT of stuff to vw owners.
I have used them about 5 times - for carbs, jets, rebuild kits, filters - always good service and delivery...
I have used them about 5 times - for carbs, jets, rebuild kits, filters - always good service and delivery...
- 3rd October 2010 - 6:56pm
- Forum: Members' Cars and Project News
- Topic: 1970 Squareback Project
- Replies: 95
- Views: 59015
Re: 1970 Squareback Project
Cannot believe I have not touched the squareback for a year now! - Too many other projects. Decided to crack on with the car - decided on painting it vw mango green L346. I am building a 76x90.5 motor for it (1955cc) with carburetors and removing all the fuel injection stuff. I have a couple of smal...
- 1st September 2010 - 11:48am
- Forum: Members' Cars and Project News
- Topic: 72 square running project
- Replies: 37
- Views: 19541
Re: 72 square running project
Agreed - but if the indicators flash orange, the brake lights red - they are legal as long as they are bright. Strange hoe Europeans (some) want to fit all red lenses and US want to fit euro lenses...
- 31st August 2010 - 11:34am
- Forum: Members' Cars and Project News
- Topic: 72 square running project
- Replies: 37
- Views: 19541
Re: 72 square running project
Red rear lenses do look cool - I have a set for my late square when I finally get around to finishing it! - One option is to fit indicators in the reverse light section with orange bulbs - another option is to fit green leds to the indicator - through the red lense - the light appears orange - appar...
- 26th May 2010 - 8:33pm
- Forum: Members' Cars and Project News
- Topic: 1968 Fastback Auto
- Replies: 15
- Views: 9110
Re: 1968 Fastback Auto
really nice car and top quality job...auto too.
- 12th May 2010 - 8:53pm
- Forum: The Workshop
- Topic: Lowering the rear of my 71
- Replies: 2
- Views: 1679
Re: Lowering the rear of my 71
there are some great videos on youtube detailing how to lower the front and back of a type 3.
Yours should be IRS being a 71 so camber will not be affected like Swing Axle on earlier cars...
Yours should be IRS being a 71 so camber will not be affected like Swing Axle on earlier cars...
- 21st February 2010 - 11:53am
- Forum: Members' Cars and Project News
- Topic: 72 auto square
- Replies: 121
- Views: 63692
- 3rd February 2010 - 9:45pm
- Forum: Members' Cars and Project News
- Topic: My sweet 1965 1500 "S" Squareback.
- Replies: 9
- Views: 7956
Re: My sweet 1965 1500 "S" Squareback.
thanks T3PO - I have been looking for a set for ages to match a red interior. I contacted cocomats today and ordered a set like WheelerDealer has in the blue car - thanks for the post love the car. do cocomats have templates for squarebacks? I would love a set of left hand drive mats for an automati...
- 2nd February 2010 - 9:10pm
- Forum: Members' Cars and Project News
- Topic: My sweet 1965 1500 "S" Squareback.
- Replies: 9
- Views: 7956
Re: My sweet 1965 1500 "S" Squareback.
love the car. do cocomats have templates for squarebacks? I would love a set of left hand drive mats for an automatic car. Post some pictures when you have them fitted - they sound really good. enjoy the square... Hello New to this forum, and I want to share my beautyful Sqaure with you all. Bought ...
- 10th January 2010 - 3:37pm
- Forum: The Workshop
- Topic: Eberspachers
- Replies: 15
- Views: 7256
- 23rd November 2009 - 3:55pm
- Forum: Members' Cars and Project News
- Topic: 412 resto
- Replies: 55
- Views: 31784
- 15th October 2009 - 8:01pm
- Forum: The Workshop
- Topic: Need to raise my squareback
- Replies: 3
- Views: 2671
There are some really good videos on YouTube on how to raise the rear and front of a squareback. Suspension uses torsion bars rather than traditional springs - the video will help make it clear.
http://www.youtube.com/watch?v=AMxBolHOJR4
http://www.youtube.com/watch?v=AMxBolHOJR4
- 28th September 2009 - 9:51pm
- Forum: The Workshop
- Topic: Squareback interior help please !
- Replies: 13
- Views: 7563
2.5k is steep unless you are going for something really special. If you bought door panels, seat covers and seat pads, headliner from TMI and took the lot to a decent trimmers and asked them to make up a carpet set - I cannot see that coming anywhere near 2.5. Frostys trimmers in Feltham are good bu...
- 9th September 2009 - 8:44am
- Forum: Members' Cars and Project News
- Topic: 1972 412 restoration starts here.
- Replies: 9
- Views: 6718
- 8th September 2009 - 8:15pm
- Forum: Members' Cars and Project News
- Topic: 1972 412 restoration starts here.
- Replies: 9
- Views: 6718
Re: Ernest's old car....
good luck with the project btw -
rickycox wrote:Hi...
I have now have Ernest's old 412..... LCG 970L
Any photos you have, info on the car and Ernest would be greatfully recieved.
The car is on the road and used daily.....
- 8th September 2009 - 8:14pm
- Forum: Members' Cars and Project News
- Topic: 1972 412 restoration starts here.
- Replies: 9
- Views: 6718
Interested in the marine section bumper rubber - been trying to find some original stuff for a while but if marine stuff works - would appreciate any details you have - thx That's Ernest Hurdle's old car. He has been a club member since 1991. he was very proud of it - I think the bumper rubber has b...
- 8th September 2009 - 7:44am
- Forum: Members' Cars and Project News
- Topic: 412 resto
- Replies: 55
- Views: 31784
- 7th September 2009 - 6:15pm
- Forum: Members' Cars and Project News
- Topic: 1970 Squareback Project
- Replies: 95
- Views: 59015
- 6th September 2009 - 7:34pm
- Forum: The Workshop
- Topic: front n rear screen rubbers
- Replies: 10
- Views: 5252