wheels & tyre sizes?
wheels & tyre sizes?
Hi guys,
I want to change the wheels on my squareback to maybe a wide rear skinny front combo?
what is the widest rear wheel i could get on? It has been lowered but not sure by how much! I know it'll depend in the offset etc but maybe if anyone has time to put some pictures on to show me that would be a great help?
Many thanks
Mark
I want to change the wheels on my squareback to maybe a wide rear skinny front combo?
what is the widest rear wheel i could get on? It has been lowered but not sure by how much! I know it'll depend in the offset etc but maybe if anyone has time to put some pictures on to show me that would be a great help?
Many thanks
Mark
Re: wheels & tyre sizes?
I run a 6.5J all round on mine
Re: wheels & tyre sizes?
Tyre size?eagle wrote:I run a 6.5J all round on mine
Is your car lowered?
Have you got any pictures you could post?
Many thanks
Mark.
- Angelo Amato
- Posts: 337
- Joined: 25th January 2005 - 12:54pm
- Location: Wirral
Re: wheels & tyre sizes?
7.5x17 et37 front and rear no problems.
now have Porsche wheels of same size on and set at same offset, no problems.
some photos here...
http://s836.photobucket.com/user/Angelo ... t=3&page=1
Angelo
now have Porsche wheels of same size on and set at same offset, no problems.
some photos here...
http://s836.photobucket.com/user/Angelo ... t=3&page=1
Angelo
Re: wheels & tyre sizes?
lovely car, thanks for the picture. What size tyres do you have on there?Angelo Amato wrote:7.5x17 et37 front and rear no problems.
now have Porsche wheels of same size on and set at same offset, no problems.
some photos here...
http://s836.photobucket.com/user/Angelo ... t=3&page=1
Angelo
cheers
- Angelo Amato
- Posts: 337
- Joined: 25th January 2005 - 12:54pm
- Location: Wirral
Re: wheels & tyre sizes?
205/45/17 rear 40 series front
Re: wheels & tyre sizes?
How do you manage with the standard steering angles and lock stops on the front?
My Squareback doesn't seem to have any adjustments for restricting the lock on the steering, I'm wondering what your solution might have been.
My Squareback doesn't seem to have any adjustments for restricting the lock on the steering, I'm wondering what your solution might have been.
73 de Wayne M5WJF
'73 Type 4 412 LS Variant (UK Reg '74)
'73 Type 4 412 LS Variant (UK Reg '74)
- Angelo Amato
- Posts: 337
- Joined: 25th January 2005 - 12:54pm
- Location: Wirral
Re: wheels & tyre sizes?
it clears all ok but on the fullest of lock the inside of tyre just touched the inner wing, this I cured using the little metal plate thingies you put over the bottom trailing arm stopper for the stub axle.
Re: wheels & tyre sizes?
Cheers guys for the info, its put my mind at ease with what I'm doing. Any more pictures and sizes will push me on.
As much as I like the mega-lowered slimmer wheeled look, I want mine to look fatter and solid as a squareback van.
Taking my wheels to have tyres removed and refurbished today.
Thanks again
mark.
As much as I like the mega-lowered slimmer wheeled look, I want mine to look fatter and solid as a squareback van.
Taking my wheels to have tyres removed and refurbished today.
Thanks again
mark.
Re: wheels & tyre sizes?
7x17 cup 1's et 55, I tried a 225/45/17 all round but had no chance of getting them on the rears as my car currently is with its uniball setup. They touch everything inside and out, with some getting I could probably go that big but at the time I couldn't be bothered. I've settled for a 205/45/17 all round and have no rubbing issues. I may try a 215/45/17 next time to go a little wider as the 205's look a little skinny from the back unless I begins to change things around in the back.
Re: wheels & tyre sizes?
I must be having a blonde moment, any chance you can post a pick of this metal plate thingy as I'm getting the nearside front with full lock touching on the inside with stock 165r15s, and don't know how to stop this.Angelo Amato wrote:it clears all ok but on the fullest of lock the inside of tyre just touched the inner wing, this I cured using the little metal plate thingies you put over the bottom trailing arm stopper for the stub axle.
Cheers.
73 de Wayne M5WJF
'73 Type 4 412 LS Variant (UK Reg '74)
'73 Type 4 412 LS Variant (UK Reg '74)
- purplepeter
- Posts: 2339
- Joined: 8th August 2006 - 4:41pm
- Location: Bath, Avon
Re: wheels & tyre sizes?
I think He means these: http://www.ebay.co.uk/itm/Lenkanschlagb ... 20dc97b4ef
Re: wheels & tyre sizes?
I fabricated something similar when my tyres were rubbing on the body at full lock. Usually the problem only presents itself on full lock manoeuvring in reverse when you can get a graunch as a ridge on the torsion arm grinds against a ridge on the steering knuckle. If you take a look, you'll see where the surfaces have ground away material. The steering stop is shown as no. 8 on the parts diagram at http://home.clara.net/hallvw/type3/T3pbo/T3pb4-6.htm .
It's not too hard to work out the shape to do this job, but how thick a piece of steel would be needed would depend on the amount of rubbing. My pattern was like a pair of wings folded round the arm, and drilled near the ends, with a tab bent at right angles to locate it. Thinner metal tends to be ground into the worn hollow, but may help enough. I see that Konny's is made from 3mm steel, which is probably the maximum thickness feasible.
It's not too hard to work out the shape to do this job, but how thick a piece of steel would be needed would depend on the amount of rubbing. My pattern was like a pair of wings folded round the arm, and drilled near the ends, with a tab bent at right angles to locate it. Thinner metal tends to be ground into the worn hollow, but may help enough. I see that Konny's is made from 3mm steel, which is probably the maximum thickness feasible.
Dave.
- Angelo Amato
- Posts: 337
- Joined: 25th January 2005 - 12:54pm
- Location: Wirral
Re: wheels & tyre sizes?
thanks I couldn't find a pic in my database ! , that's the one and off Konny too. he has modified them a little but work the same.
purplepeter wrote:I think He means these: http://www.ebay.co.uk/itm/Lenkanschlagb ... 20dc97b4ef
Re: wheels & tyre sizes?
Thanks guys, mine are missing, we did try a couple of jubilee clips as spacers but it seems these are the right solution, if a little pricey.
My rubbing only occurs in reverse on full lock on the nearside front, so there's probably some wear as you say.
My rubbing only occurs in reverse on full lock on the nearside front, so there's probably some wear as you say.
73 de Wayne M5WJF
'73 Type 4 412 LS Variant (UK Reg '74)
'73 Type 4 412 LS Variant (UK Reg '74)
Re: wheels & tyre sizes?
I think it's as much a symptom of the type of steering box we have on Type 3s. If you lift the front and compare the straight ahead steering play with the amount of play with the wheel turned full lock, you can appreciate why it rubs in reverse, when castor plays its part.
Dave.