Injector seals

Come here to ask for technical help and advice
Post Reply
theswan
Posts: 13
Joined: 20th December 2011 - 8:05pm

Injector seals

Post by theswan » 20th May 2017 - 5:12pm

Hi is there anyone who can help me ,I have a 412le and have had three goes at trying to get the bottom seals for the injectors and every time I get seals that are to small please can anyone either help in the way of a code for the seals ,plus help in where I can get them from thanks to all who might be able to help.

User avatar
Editor
Posts: 5515
Joined: 10th October 2004 - 8:52pm
Location: Pensford, Bristol
Contact:

Re: Injector seals

Post by Editor » 21st May 2017 - 1:35am

Bosch? The VW part number is 311 133 261A for W series engines from 057 035 and all EA series. If yours is an earlier W series, remove the 'A'.
I suggest you contact Jane or Bryan on 01303840374, who may well have some to sell, or could advise. I hadn't realised there were two different parts (applies to Type 3s too, but I've not bothered to add the engine nos). I thought they were the same as some of the older VW watercooled FI cars, but maybe not. Looking at 261 with no suffix, they seem to be sold as suitable for all aircooled VWs including the Type 4 engined ones, which 261A are also sold as suitable.
Phone Jane or Bryan at the Farm in Kent to sort this one out - they specialise in type 4s.
Dave.

User avatar
mike860745
Posts: 1
Joined: 25th February 2017 - 9:15pm

Re: Injector seals

Post by mike860745 » 26th June 2017 - 10:23pm

I don't know whether you have got this sorted now but I had all 4 of mine completely refurbished for £120 by Steve at Mr Injector in Beyton Suffolk. Mine were really not in a good way and he resurrected them to as new condition including seals etc. Would highly recommend using him. Really nice guy too - http://www.mrinjectoruk.co.uk/ - Cheers, Mike

Post Reply