type 4 sills

Come here to ask for technical help and advice
Post Reply
User avatar
Daz Max
Posts: 16
Joined: 3rd April 2006 - 1:09am
Location: Godalming surrey uk

type 4 sills

Post by Daz Max » 12th April 2006 - 11:15pm

are the sills on a type4 the same as a type3? if not where could i get any? HELP! :cry:
Top
User avatar
Editor
Posts: 5515
Joined: 10th October 2004 - 8:52pm
Location: Pensford, Bristol
Contact:
Contact Editor

Type 4 sills

Post by Editor » 15th April 2006 - 12:03am

Jane and Bryan Terry used to use sills from a Ford something - close enough to be OK. Contact her or Bryan on 01303840241.
Top
User avatar
Daz Max
Posts: 16
Joined: 3rd April 2006 - 1:09am
Location: Godalming surrey uk

Post by Daz Max » 15th April 2006 - 2:14am

been contacted on volksbiz, to say that bay van sills fit just need cutting down(the side without the door) cheers Darren. :D
Top
User avatar
Editor
Posts: 5515
Joined: 10th October 2004 - 8:52pm
Location: Pensford, Bristol
Contact:
Contact Editor

Sills

Post by Editor » 15th April 2006 - 3:16pm

When you think about it, below the door opening most sills are just a gentle curve with a return, and they don't usually rust on the top surface anyway. Even the drain holes can be shaped without too much work.
Top
Post Reply

Return to “The Workshop”