412 rear wheel bearings
412 rear wheel bearings
just wondering if any one knows what size the rear wheel bearings are,or if they are the same as something else never done one of these, looks fun.
65 notch
69 squareback
73 fastback
74 412
69 squareback
73 fastback
74 412
- plumcrazee
- Posts: 202
- Joined: 27th September 2006 - 11:53pm
- Location: GREAT BARR, birmingham
Timken still produces type 4 real wheel bearings and is propably the only manufacturer who still lists bearings for 411/412.
Timken part numbers:
Seal: 1969
Cone: LM78349
Cup: LM78310A
Timken used to have a really good on-line catalogue with all the measurements etc. but not anymore. But i'm sure any Timken retailer can give you all the info you need. Cone and cup were also used on Audis and Maseratis so they are surely available just about anywhere, but it's the seal that might be difficult to find. I've understood that Timken produces some slowly selling items only couple of times per year and it's possible you'll have to wait a while, till you get what you have ordered.
Here's a link to the timken catalogue:
http://www.timken.com/EN-US/Knowledge/F ... talog.aspx
Timken part numbers:
Seal: 1969
Cone: LM78349
Cup: LM78310A
Timken used to have a really good on-line catalogue with all the measurements etc. but not anymore. But i'm sure any Timken retailer can give you all the info you need. Cone and cup were also used on Audis and Maseratis so they are surely available just about anywhere, but it's the seal that might be difficult to find. I've understood that Timken produces some slowly selling items only couple of times per year and it's possible you'll have to wait a while, till you get what you have ordered.
Here's a link to the timken catalogue:
http://www.timken.com/EN-US/Knowledge/F ... talog.aspx