Still looking for a drive plate

Just for 411 and 412 stuff.
Post Reply
User avatar
hernandez412
Posts: 34
Joined: 6th August 2009 - 11:10pm
Location: Dunfermline Scotland

Still looking for a drive plate

Post by hernandez412 » 22nd February 2010 - 7:56pm

Hi there folks, I'm still looking for a drive plate for my 412 automatic squareback. These are tricky little beggars to find :roll:
Cheers, Jim

User avatar
aircoolsteve
Posts: 452
Joined: 5th March 2005 - 7:29pm
Location: rochester. kent

Post by aircoolsteve » 6th March 2010 - 10:08pm

hi jim. i've recently sold a flywheel to a guy on here that is converting his type4 to manual. maybe he has a driveplate. i'll have a search and look for him and get back to you with his username. that is if you haven't found one yet.
cheers. steve

User avatar
aircoolsteve
Posts: 452
Joined: 5th March 2005 - 7:29pm
Location: rochester. kent

Post by aircoolsteve » 6th March 2010 - 10:36pm

hi jim. had a look around and his username on VZI is "spacedmonkey"
you never know, he may have one.
steve

User avatar
Editor
Posts: 5515
Joined: 10th October 2004 - 8:52pm
Location: Pensford, Bristol
Contact:

Post by Editor » 7th March 2010 - 1:15pm

I think spacedmonkey has joined us here. Could try a PM.
Dave.

User avatar
hernandez412
Posts: 34
Joined: 6th August 2009 - 11:10pm
Location: Dunfermline Scotland

spacedmonkey contact

Post by hernandez412 » 9th March 2010 - 3:32pm

Hi guys checked on vzi. Could only find a spacemonkey on page 87 of the letter s's. Zero posts and no contact. BooHoo. No trace on this site either, Hohum :( :(

User avatar
shawn71
Posts: 1060
Joined: 14th November 2007 - 11:54am
Location: East Sussex

Post by shawn71 » 9th March 2010 - 3:54pm


Post Reply