THE TECH.FOR TO REPAIR SLIDER SWITH

Just for 411 and 412 stuff.
Post Reply
bb412
Posts: 29
Joined: 2nd May 2010 - 10:09pm
Location: canada

THE TECH.FOR TO REPAIR SLIDER SWITH

Post by bb412 » 9th May 2010 - 12:11pm

hello,,412 fans,, thanks DAVE,, if you have a problem with your front fan, the fault is from the slider control . If the right side slider doesn't make contact for the motor, remove all the slider frame and disconnect the cable,, and the common problem is we broke the plastic pin inside the slider. We can change all the parts on the right slider by the left side slider parts, and it is good for another 30 years :D

User avatar
kps70
Posts: 375
Joined: 24th April 2007 - 7:40pm
Location: Malawi

Re: THE TECH.FOR TO REPAIR SLIDER SWITH

Post by kps70 » 10th May 2010 - 10:10pm

Hi - yes I just had to repair my slider switch this weekend. I had to screw a small screw into the back of the plastic slider to hold the cable in place. The plastic easily breaks after 40 years!
Kieron
Kieron

bb412
Posts: 29
Joined: 2nd May 2010 - 10:09pm
Location: canada

Re: THE TECH.FOR TO REPAIR SLIDER SWITH

Post by bb412 » 11th May 2010 - 12:12am

DO YOU WANT MORE INFORMATIONS,, send me pm,,and i geeve you more info. with the pict,,DAVE he knows ,,but it is busey,,

User avatar
ItsBernie
Posts: 32
Joined: 13th July 2010 - 12:46am
Location: 74363 Gueglingen, Germany
Contact:

Re: THE TECH.FOR TO REPAIR SLIDER SWITH

Post by ItsBernie » 26th September 2010 - 11:50am

Mine was broken, too, good luck I have another whole dashboard (without any single crack), where I could 'steal' the neccessary parts off, maybe I will switch the whole dash in some day, but too much trouble right now. I just bought a dash cover from the states, fits very well and hides all imperfections. ;)
VWs I owned during my lifetime

'71 1302 Sedan
'70 1302 Convertible
'78 1303 Convertible
some Bugs '67 - '75 in Winter
'72 412 LE Wagon
'72 1600S Notchback
'99 Lupo Automatic
'96 Polo 6N Automatic
'07 Polo 9N Automatic
'73 412 LS Sedan 4-dr Automatic

Post Reply