What would you guys do with this?
What would you guys do with this?
Hi guys,
I have this 1968 RHD Fastback that came free of charge with another fasty that I had bought...
It's still quite solid, was never hit and is mostly surface/minor rust. Heater channels etc are still absolutely solid!!!!! As is the pan, with the exception of the battery tray area...
It does need better doors, fenders etc but is pretty much complete - even has all the OG wiring, a very nice and clean OG black interior etc
So, do you guys think that it's worth fixing up or should I strip it for parts?? I'm in two minds about it....Maybe you guys can convince me to build a looker of note
I have this 1968 RHD Fastback that came free of charge with another fasty that I had bought...
It's still quite solid, was never hit and is mostly surface/minor rust. Heater channels etc are still absolutely solid!!!!! As is the pan, with the exception of the battery tray area...
It does need better doors, fenders etc but is pretty much complete - even has all the OG wiring, a very nice and clean OG black interior etc
So, do you guys think that it's worth fixing up or should I strip it for parts?? I'm in two minds about it....Maybe you guys can convince me to build a looker of note
'68 Fasty - 1700 Type 4
Re: What would you guys do with this?
looks like a goer to me rhd early solid shame to break, getting very rare t3s ...
any way have ya seen my sqaure that was a basket case still didnt want to break it...
there all worth saving..
jon
any way have ya seen my sqaure that was a basket case still didnt want to break it...
there all worth saving..
jon
Maufactured by Volkswagen
Remanufactured by me.....
Remanufactured by me.....
Re: What would you guys do with this?
Definately save the old girl in my opinion.
"A BLIND MAN WOULD BE GLAD TO SEE IT"
WWW.DBS-VW.CO.UK
WWW.CTTP.CO.UK
WWW.DBS-VW.CO.UK
WWW.CTTP.CO.UK
Re: What would you guys do with this?
save it to good to break
[i][u]BLUE RIDGE RUNNERS AUTO SHOW [/u][/i]
6-8th September 2019
just 2 miles off J23 M5
For more details PM me or email me
Show@blueridgerunners.co.uk
6-8th September 2019
just 2 miles off J23 M5
For more details PM me or email me
Show@blueridgerunners.co.uk
Re: What would you guys do with this?
is it an aus import? cus jus lookin at it wide 5s went for us in 65 didnt they?
67 fastback
65 bug
KNOWLEDGE IS POWER!!
65 bug
KNOWLEDGE IS POWER!!
Re: What would you guys do with this?
Not Australia, it says ZA on the back - Zuid Afrika (South Africa).
They had wide 5s until around 69 I think.
They had wide 5s until around 69 I think.
Dave.
Re: What would you guys do with this?
Yup it is in SA.
SA only had Type 3s until '69. All models, except '69 Autos, were wide 5.
Well, a fellow Type 3 enthusiast had a look at the car over the weekend and said that it is very much doable, was never hit in the front so is still quite solid.
I'll start collecting parts for it after June, will start a thread here when that happens
Have a basic idea of what I want to do, nothing radical, just lowered, nice wheels and satin paint...
Thanks all!
SA only had Type 3s until '69. All models, except '69 Autos, were wide 5.
Well, a fellow Type 3 enthusiast had a look at the car over the weekend and said that it is very much doable, was never hit in the front so is still quite solid.
I'll start collecting parts for it after June, will start a thread here when that happens
Have a basic idea of what I want to do, nothing radical, just lowered, nice wheels and satin paint...
Thanks all!
'68 Fasty - 1700 Type 4
Re: What would you guys do with this?
so who got the rare wide 5 disks then? cus there RUUUUUDE!!!!!!
67 fastback
65 bug
KNOWLEDGE IS POWER!!
65 bug
KNOWLEDGE IS POWER!!
Re: What would you guys do with this?
So - the project has officially started!
Stripped out the interior, the OG upholstery is still in very good condition...So gave it a thorough clean and put away in safe storage....This car was from a very dry part of SA, so it is still absolutely straight...
Basic plan
- Firstly give front end a thorough clean and lower suspension 2 splines - Lowered Type 3s motivate me.
- Clean pans and have battery area welded.
- Paint pans black and paint the interior of the car BMW Frozen gray (satin finish)
- Sort wiring out - needs minimal attention.
- Source engine
- Do brakes etc
- Get car running
-Fit donor doors and fenders and do general bodywork
- Primer the entire car.
- Drive the car in primer to get a feel of it.
- Try sorting registration out - major schlep in ZA to get a car with no papers registered, but will try...
- Once or if registration successfully completed, can have the entire car painted in BMW Frozen Gray
- Then can tweak and 2nd phase of the project can start...
Wish me luck!
Looking for a set of flat rear lenses, if anyone has a set that they would be interested in parting with, give me a shout...
Stripped out the interior, the OG upholstery is still in very good condition...So gave it a thorough clean and put away in safe storage....This car was from a very dry part of SA, so it is still absolutely straight...
Basic plan
- Firstly give front end a thorough clean and lower suspension 2 splines - Lowered Type 3s motivate me.
- Clean pans and have battery area welded.
- Paint pans black and paint the interior of the car BMW Frozen gray (satin finish)
- Sort wiring out - needs minimal attention.
- Source engine
- Do brakes etc
- Get car running
-Fit donor doors and fenders and do general bodywork
- Primer the entire car.
- Drive the car in primer to get a feel of it.
- Try sorting registration out - major schlep in ZA to get a car with no papers registered, but will try...
- Once or if registration successfully completed, can have the entire car painted in BMW Frozen Gray
- Then can tweak and 2nd phase of the project can start...
Wish me luck!
Looking for a set of flat rear lenses, if anyone has a set that they would be interested in parting with, give me a shout...
'68 Fasty - 1700 Type 4
Re: What would you guys do with this?
keep the pics coming, good to see a project happening
Re: What would you guys do with this?
I'm after a Notchback, so want to flog this one. If anyone is interested, please drop me a mail on blitzvw@gmail.com. I do not want a lot of money for the car, more interested in it going to a safe home where it will be restored...so far all the inquiries that i've had for the car locally were for parts, really don't want to break this car
'68 Fasty - 1700 Type 4