My Notchback's.
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
At VW Action .........
Went to Slough swapmeet today, got a few things for mi cars
Been after a pair of these for a few years..........
They are Italian spec late Type 3 Indicator lenses
only ever seen one other pair which was on a Fasty in Germany a few years ago.
also got a parcel shelf and a spare 1500'S' front wing .........
Danny.
Went to Slough swapmeet today, got a few things for mi cars
Been after a pair of these for a few years..........
They are Italian spec late Type 3 Indicator lenses
only ever seen one other pair which was on a Fasty in Germany a few years ago.
also got a parcel shelf and a spare 1500'S' front wing .........
Danny.
Got a Notch? www.facebook.com/groups/327056744047848/
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
Dragged the '72 out of the garage last weekend, its has sat there since the end of June, the accelerator pedal isnt to safe, need to get it sorted soon then MOT'd again,
Fitted mi new Indicators .......
Mi dad is currently restoring his '64 Splitty, he has done as much as he can at the mo, he cant do no more til the weather gets warmer, so he asked me if he could rebuild the Two engines I have in mi lock up (he gts bored easily) I obviously said yes
Got this one off Walkerdude for free its a 1500 .........
and got this one a couple of years ago, cost about £50 I think, tis a 1600 .......
Not sure which he is doing first, once rebuilt, will be fitted to which ever car then the one in the car will be refurbished too
Danny.
Fitted mi new Indicators .......
Mi dad is currently restoring his '64 Splitty, he has done as much as he can at the mo, he cant do no more til the weather gets warmer, so he asked me if he could rebuild the Two engines I have in mi lock up (he gts bored easily) I obviously said yes
Got this one off Walkerdude for free its a 1500 .........
and got this one a couple of years ago, cost about £50 I think, tis a 1600 .......
Not sure which he is doing first, once rebuilt, will be fitted to which ever car then the one in the car will be refurbished too
Danny.
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
Update, Ill do mi best on reading mi Dads handwritting,
Jobs done on the Notch since failing the MOT last Saturday.......
New Tyre fitted,
Rear wheel cylinders renewed,
Rear hub oil seal renewed,
Handbrake arm renewed,
Freed off front cylinders,
Brakes bled,
Gear oil topped up,
Pack front bearings,
Bulbs in side lights renewed,
Replace O/S heat exchanger,
clean both carbs,
fit new points,
retime distributer,
repair oil leak (Big bolts on casing loose)
MOT retest is tomorrow
hopefully will sail through
Danny.
Jobs done on the Notch since failing the MOT last Saturday.......
New Tyre fitted,
Rear wheel cylinders renewed,
Rear hub oil seal renewed,
Handbrake arm renewed,
Freed off front cylinders,
Brakes bled,
Gear oil topped up,
Pack front bearings,
Bulbs in side lights renewed,
Replace O/S heat exchanger,
clean both carbs,
fit new points,
retime distributer,
repair oil leak (Big bolts on casing loose)
MOT retest is tomorrow
hopefully will sail through
Danny.
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
Have just got back from taking the '72 for the MOT ...........
Passed
two advisories, drivers side rear wheel bearing needs doin and handbrake needs tightening.
Ran rubbish on way there and back kept coughing and spluttering, checked the points they were ok, maybe a dodgy carb?
Danny.
Passed
two advisories, drivers side rear wheel bearing needs doin and handbrake needs tightening.
Ran rubbish on way there and back kept coughing and spluttering, checked the points they were ok, maybe a dodgy carb?
Danny.
Got a Notch? www.facebook.com/groups/327056744047848/
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- purplepeter
- Posts: 2339
- Joined: 8th August 2006 - 4:41pm
- Location: Bath, Avon
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
- Danny Lord
- Posts: 2395
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
Re: My Notchback's.
Dont you just hate it when your Car is so low it wont go into the garage?!
Got a Notch? www.facebook.com/groups/327056744047848/