rolling chassis+ parts

Please say whether for Type 3 or Type 4
Post Reply
fastty
Posts: 117
Joined: 13th March 2008 - 8:26pm
Location: lancashire

rolling chassis+ parts

Post by fastty » 7th December 2017 - 5:36pm

with things starting to happen on my fassty project i have a few bits up for sale.

complete rolling chassis with engine gearbox( was supposed to be a 1641cc but not sure) engine does have a turbo on it. £200 please pm me on this as it does have a narrowed type 3 front beam.
dual stainless steel exhaust back box.£30
pair of fibre glass front wings ( later type ) £40 the pair
front inner wings ( they have been tubbed for a 5" narrowed beam ) £50 each
rear inner wings £40 each
pair of type 3 carbs £10

sure i have a few other bits as well, once i get car down at garage i will put them on.

all parts are pick up only unless you want to sort carriage out.
early fasty bits needed

User avatar
sparkywig
Posts: 124
Joined: 28th August 2013 - 12:49pm

Re: rolling chassis+ parts

Post by sparkywig » 7th December 2017 - 7:44pm

Interested in the narrowed beam if you'll sell it separately.

gerrygerbil
Posts: 97
Joined: 9th December 2016 - 8:30pm

Re: rolling chassis+ parts

Post by gerrygerbil » 7th December 2017 - 8:02pm

What carbs are they

chrisvrc
Posts: 9
Joined: 30th March 2013 - 8:41pm

Re: rolling chassis+ parts

Post by chrisvrc » 7th December 2017 - 9:12pm

Hi, Are the front wings good quality like the old day mouldings . is there any chance of a picture.

Kind regards
Chris

User avatar
broady_6
Posts: 1107
Joined: 13th January 2009 - 9:55pm

Re: rolling chassis+ parts

Post by broady_6 » 7th December 2017 - 10:25pm

Very interested in the full rolling chassis
The sultan of swing

User avatar
1967_vw
Posts: 19
Joined: 20th October 2014 - 3:25pm

Re: rolling chassis+ parts

Post by 1967_vw » 7th December 2017 - 11:31pm

Rear inner wings - any chance of a picture or a description of the condition? If they are complete and not rotten then I’ll take them. If you could wrap them and give me details of the weight and dimensions I’ll either arrange a courier or come and pick them up.

fastty
Posts: 117
Joined: 13th March 2008 - 8:26pm
Location: lancashire

Re: rolling chassis+ parts

Post by fastty » 7th December 2017 - 11:48pm

the narrowed beam will only fit this floor pan as i have narrowed the front fame head a raised it 2".

the carbs are the standard solex ones, i think i have the manifolds as well.

the front wings look really good, not the normal rubbish.

im going to the container where the car is this week end so i will get a load of pics on for you all.
early fasty bits needed

gerrygerbil
Posts: 97
Joined: 9th December 2016 - 8:30pm

Re: rolling chassis+ parts

Post by gerrygerbil » 8th December 2017 - 8:08pm

hi can i take the carbs are they 32/34 solex if so i will pay carriage thanks graham


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest