Friction plate size for AN Code Engine

Come here to ask for technical help and advice
Post Reply
User avatar
Wireless
Posts: 284
Joined: 13th January 2013 - 12:28am
Location: Shrewsbury

Friction plate size for AN Code Engine

Post by Wireless » 9th September 2016 - 4:04pm

The engine swap in my 412LS Variant is going ahead next week, it currently has a CB Code 1700 in it from an Early Bay, which we're told should be a 210mm, but as we're fitting it into a 76 Bay we're told there might be an issue with the clutch, which might or might not be 215mm

The AN Code engine to fit in the 412LS, uses a 210mm friction plate.

I know the swap in the 412LS shouldn't be a problem, it'll have a new 210mm clutch kit, I'll just have to do some head scratching before putting the CB Code in the 1600 Bay.
73 de Wayne M5WJF

'73 Type 4 412 LS Variant (UK Reg '74)

Post Reply