project 72 fastty
project 72 fastty
new to forum.just picked up 72 fastty project,going to convert to earlier look.pic all panles up from type3 detectives on thursday.going for a slamed restro/cal looker on big rims,will post pics as soon as iv worked howto.
early fasty bits needed
- Danny Lord
- Posts: 2398
- Joined: 26th May 2005 - 8:57pm
- Location: Gillingham Kent
- Contact:
just picked up all the parts needed to turn into early car.got from type3 detectives(14 hour round trip with easter weekend traffic),very helpfull will certainly be back for more parts.finnally can start tear down now ive got some parts to go back on.will post pics over weekend.
early fasty bits needed
fastty parts
have got a complete front end off a 67 car,am going to replace complete front with new one.i got 2xrear wings, 2xfront wings, boot lid, bonnet,drivers door,2x sets rear lights,early style bumpers front and back plus the complete front clip.
early fasty bits needed
project fastty
right ,cant get pics on wont seem to upload for some reason,but heres my myspace site there all on there and will be updated as i go(once i found out how to get pics on forum i will do so)www.myspace.com/blacktopcustomsuk more pics to follow.also going to turbo will post pics as i go.
early fasty bits needed
fastty
fastty is now lowered 3 splines up front,2splines out back.floor pan repair sections should be here early next week and hubs should be back from machine shop monday or tuesday.body should be back next weekend by which time the floor pan should be ready.going to start doing pipe work for turbo towards end of week.its all go and not enough hours in a day.
early fasty bits needed
Just trying...
OK, so get the picture showing on your site, right click on it and select properties, then highlight the URL (all of it as far as the .jpg at the end), stick it in your forum post highlighted and click on [img] box above.
Next problem is resizing it if it comes out stupidly small!
Good luck.
OK, so get the picture showing on your site, right click on it and select properties, then highlight the URL (all of it as far as the .jpg at the end), stick it in your forum post highlighted and click on [img] box above.
Next problem is resizing it if it comes out stupidly small!
Good luck.
Dave.
fastty
hubs are now back,redrilled to 5x100 pcd.wheels now fit with no clearance problems.body has been blasted ,will pick it up on mon/tues and yes i have changed the whole front end so the early front wings will fit.project is going well so far,hoping to have all welding done by the end of the month.
early fasty bits needed
fastty
body is now blasted,looks good apart from bottom lower around engine mounts which are fairly bad.new front which has been fitted is like new.body will be picked up at the week end,just waiting for floor pan repair sections to come then i can get body trial fitted to check ride hieght on the new rims(got to be on the deck).
early fasty bits needed
have started all the smoothing work,first rear pillar repiars then deguttered roof,smoothed rear wing vents,smooth doors,no petrol flap and debaged and peaked bonnet,boot lid has also been smoothed.its rolling on a set of 18" while the new tyres arrive so i cant set final ride hieght untill then.there is a lot of welding to do around both bottom rear corners.there is about two weeks worth of welding to be done just at the back,only good news is it looks like there is plenty of room for the 19" on the back.more pics as i go.
early fasty bits needed