Rear subframe installation

[phillthepage]

Daft Question,
When installing the rear sub frame plate that holds the large rubber bush at the V should there be any washers / bushes etc top side on the four corners?
I can see on the drawing that below has a washer and a spring washer.
Not 100% on the top side looks like you just bolt it up to the floor pan.
Rookie mistake, I seam to recall wrestling it out and dropping it all on the floor.
Any advice welcomed.
Cheers

[miketyp3]

No washers in between the plate and the floorpan, just the plain washer (load spreading) and the spring washer (to resist undoing) as shown.
Cheers